|
By (user no longer on site) OP 10 weeks ago
|
Hi I really want to get back into chastity
I've had a holy trainer I think v4 and the £19 house of denial one but whenever I get hard it just starts to push forward so I can't really wear it for long times and outside
Any tips on how to improve this would be greatly appreciated |
Reply privately, Reply in forum +quote
or View forums list | |
|
By *w_cuckCouple 10 weeks ago
Cambridgeshire |
I have tried many cages over the years and find the smallest you can get into is best. I find If it's big enough to get any movement then I get semi erect and it's so painful. So a small one which needs a cold shower to fit prevents me getting àny movement. |
Reply privately, Reply in forum +quote
or View forums list | |
"I have tried many cages over the years and find the smallest you can get into is best. I find If it's big enough to get any movement then I get semi erect and it's so painful. So a small one which needs a cold shower to fit prevents me getting àny movement."
Yes agree the smaller the better, in my case a Holy Trainer nub |
Reply privately, Reply in forum +quote
or View forums list | |
|
By (user no longer on site) OP 10 weeks ago
|
Would you recommend me getting the strap that attaches to the back ring and goes around your back to keep the cage tight and in place??
Thanks for the replies |
Reply privately, Reply in forum +quote
or View forums list | |
|
By *auradCouple 10 weeks ago
glasgow |
"Also any tips on how to get in them easier as it takes me quite a long time "
One ball at a time! And either moisturiser or a bit of lube helps. I’ve got one where the ring is hinged which makes getting it on easier but you need to be careful not to nip your skin when the hinge closes. |
Reply privately, Reply in forum +quote
or View forums list | |
Smaller is always good. And the right base ring size.
I hear good things on kink3d, and that's the route I'll be going soon, on the baby size.
At the moment I'm using cages from 3DXY, they are fine. Come with various ring sizes. I use the smallest one. Not so long ago I broke the barrel lock with a nocturnal errection. Sadly they no longer have small in stock, but luckily I get life out of the cage as I cable tie it locked. Therefore, quite semi permanent and no gapping on pins.
Entirely comfortable sleeping in. I would also expect the same from kink3d. Any pathetic erection in the night just goes unnoticed... .
I also enjoy using my flat inverted cage. But I use a larger ring size and a chastity strap.
The straps are ideal and work a treat.
|
Reply privately, Reply in forum +quote
or View forums list | |
we have had to begin to get smaller cages as the power of his erections can cause problems so I am removing the
Movement possibilities and really building up to a made to measure cage that will be his permanent cage. Yes the cage will be locked and the lock sealed, so we need to ensure we have the perfect fit. He realises it will only be milking for healthfor the rest of our time together and of course him ensuring my pleasure |
Reply privately, Reply in forum +quote
or View forums list | |
We had a a clear plastic one and downsized but the top of Mr cheekys cock seem to push through the opening when he got excited and stared pulling plastic apart which was a scary moment, so now looking at metal or a smaller fit x |
Reply privately, Reply in forum +quote
or View forums list | |
"We had a a clear plastic one and downsized but the top of Mr cheekys cock seem to push through the opening when he got excited and stared pulling plastic apart which was a scary moment, so now looking at metal or a smaller fit x"
Ahh...that could be concerning, especially if it's maybe a knock off style.
A small cage is always they way to go, as long as base ring is right size. And cage is right.
I've experienced the same with my 3DXY cage. I use the smallest they have , and periodically with any nocturnal erection the head of my Dicklette does poke thru the opening. This isn't an issue for me at all with this style of cage. Its very strong on the bars. Although I did break the barrel lock.
Also with any nocturnal erection in it, I'm not really bothered or uncomfortable...just carry on sleeping.
I just push anything poking out back with a cotton bud later once I'm up and all limp again.
Bear that in mind with a metal cage. Also a metal cage may not be so forgiving on foreskin in other places. A 3D printed cage, does work well with a foreskin.
Happy locking.
xxx |
Reply privately, Reply in forum +quote
or View forums list | |
» Add a new message to this topic